This is a badge bit (BB) that is part of the PEP curriculum. Completing this BB is part of getting the sand badge in tool care.
Hatchets are nifty! You can cut down small trees, limb big (or small) trees, make round wood joints and notches and a bunch of other things. Many hatchets are as dull as butter knives. Let's change that!
Here's a video on how to do it with sandpaper from a guy with a cool accent:
And here's one using a file and stones:
And here's one using a stationary belt sander:
You can use an angle grinder as well, just follow the same ideas as shown above.
To get certified for this BB, post three pics:
- closeup of pic of the dull edge
- action pic of sharpening
- another closeup of sharp edge
Awesome, I just added two more videos. The belt sander one finishes with a neat sharpness test. Hint: It doesn't involve shaving hair or cutting a sheet of paper...
"Hundreds of years from now it will not matter what my bank account was, the sort of house I lived in or the type of car I drove... But the world may be different because I did something so bafflingly crazy that it becomes a tourist destination"
Just got a new Collins Axe hatchet from the hardware store for about 20 bucks, and it seems nice but the edge is pretty terrible. This'll be my first post on a BB, so bear with me if I'm doing this wrong. I hope my pictures are good enough.
The new hatchet.
The dull edge. I shaped it a bit with a metal file first.
Shaping the edge more with a coarse stone.
After polishing with a fine stone. I did a few passes on my cutting board to knock down the wire edge. I haven't done this much with my knives, but after hearing about it from Paul's podcast review of that knife sharpening video I've been doing it, and it seems to work.
Test cuts on paper. Pretty good for a cheap hatchet it you ask me.